OTARI hfe mx-5050 iv-2 biii-2 op maintenance 4th edition en free download

File name hfe_otari_mx-5050_iv-2_biii-2_op_maintenance__4th_edition_en.pdf

Part No. OS3-298 Lot: E MX-5050 MKIV-2, BIII-2 MASTER TAPE RECORDER OPERATION AND MAINTENANCE MANUAL FOURTH EDITION Printed: Dec 1997 Ed 4 (MA) CAUTION To prevent fire or shock hazard: Do not expose this unit to rain or moisture. Do not remove panels (unless instructed to do so). There are no user-serviceable parts inside. Refer servicing to qualified service personnel. PLEASE READ THROUGH THE SAFETY INSTRUCTIONS ON THE NEXT PAGE. SAFETY INSTRUCTIONS 1. Read Instructions All the safety and operating instructions should be read before the device is operated. 2. Retain Instructions The safety and operating instructions should be retained for future. 3. Heed Warnings All warnings on the device and in the operating instructions should be adhered to. 4. Follow Instructions All operating and use instructions should be followed. 5. Water and Moisture The device should not be used near water -- for example, near bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. 6. Carts and Stands The device should be used only with a cart or stand that is recommended by the manufacturer. 7. Ventilation The device should be situated so that its location or position does not interfere with its proper ventilation. For example, the device should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installa-tion, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. 8. Heat The device should be situated away from heat sources such as radiator, heat registers, stoves or other appliances (including amplifiers) that produce heat. 9. Power Sources The device should be connected to a power supply only of the type described in the operating instructions or as marked on the device. 10. Grounding or Polarization Precautions should be taken so that the grounding or polariza-tion means of the device is not defeated. 11. Power Cord Protection Power supply cords should be routed as they are not likely to be walked on